Hardox 500 vs XAR 500 difference in composition & properties.
Chromium: Hardox 500 ≤2.2% against XAR 500 ≤1%.
Key differences between Hardox 500 and XAR 500
- Chromium: Hardox 500 ≤2.2% against XAR 500 ≤1%.
Hardox 500 vs XAR 500 chemical composition (weight %)
| Element | Hardox 500 | XAR 500 |
|---|---|---|
| C | ≤0.3 | ≤0.28 |
| Si | ≤0.4 | ≤0.8 |
| Mn | ≤1.3 | ≤1.5 |
| P | ≤0.02 | ≤0.025 |
| S | ≤0.01 | ≤0.01 |
| Cr | ≤2.2 | ≤1 |
| Ni | ≤2 | – |
| Mo | ≤0.4 | ≤0.5 |
| B | ≤0.005 | ≤0.005 |
Mechanical properties, equivalents and uses
| Property | Hardox 500 | XAR 500 |
|---|---|---|
| Family | Abrasion-resistant steel plate | Abrasion-resistant steel plate |
| Tensile strength, MPa | – | – |
| Yield strength, MPa | – | – |
| Elongation, % | – | – |
| Hardness | 470–530 HBW | 470–530 HBW |
| Density, g/cm³ | 7.85 | 7.85 |
| EN | Hardox® 500 (SSAB brand; no EN number) | XAR 500 (thyssenkrupp) |
| JIS | JFE-EH500 / ABREX 500 (nearest) | – |
| IS (India) | IS 18809 ISAR 500 (nearest) · AM/NS Rockstar 500 · JSPL Rockhard 500 | IS 18809 ISAR 500 (nearest) |
| AISI / ASTM | AR500 (nearest) | – |
| Typical uses | Mostly used for crusher and screen parts, buckets, cutting edges, shredder knives and high-wear liners | Mostly used for buckets, liners, chutes, crusher and mining wear parts |
Mechanical values: Hardox 500 plate 4–32 mm (sheet 2–7 mm) / XAR 500 plate. Limits vary by standard and product form; confirm against your purchase specification.
Frequently asked questions
What is the difference between Hardox 500 and XAR 500?
Chromium: Hardox 500 ≤2.2% against XAR 500 ≤1%.
Where are Hardox 500 and XAR 500 used?
Hardox 500: Mostly used for crusher and screen parts, buckets, cutting edges, shredder knives and high-wear liners. XAR 500: Mostly used for buckets, liners, chutes, crusher and mining wear parts.
Can XAR 500 replace Hardox 500?
Only if the purchase specification allows it. Check the governing standard, chemistry limits and mechanical properties against the order, and confirm on the mill test certificate.
More tools
Can’t find your grade? Send it — we’ll source it.
Our stockist and mill sourcing network extends beyond the grades listed here. Send rare grades, unusual forms and small-quantity requirements for sourcing review.
One enquiry gives us the details to check suitable sources across the network and help move your purchase forward. Share the exact grade, standard, form, size, quantity, delivery town and required date. We’ll confirm availability, minimum order quantity and lead time against your requirement.
Mill test certificate (EN 10204 3.1) supplied with material; third-party inspection on request.
Reference basis: Compiled by Steel Impex India. Check each table’s source, product form and delivery condition before use. Sources, calculation methods and corrections.