Aluminium 6262 (free machining) equivalents, chemistry & properties.
Aluminium 6262 (free machining) is a aluminium (wrought) used for mostly used for CNC turned parts, hydraulic fittings, valves and camera parts. Below are its equivalent designations in nine standards, chemical composition, mechanical properties and density.
Aluminium 6262 (free machining) equivalent grades
- USA (ASTM / AISI / SAE)
- 6262
- UNS
- A96262
- Europe (EN)
- EN AW-6262 (AlMg1SiPb)
- Japan (JIS)
- A6262
- China (GB)
- 6262
Key data
- Family
- Aluminium (wrought)
- Density
- 2.72 g/cm³
- Typical mechanical
- T9: TS about 400 MPa
- Typical uses
- Mostly used for CNC turned parts, hydraulic fittings, valves and camera parts
- Weight
- Calculate weight in Aluminium 6262 (free machining)
Aluminium 6262 (free machining) chemical composition (weight %)
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Bi | Pb |
|---|---|---|---|---|---|---|---|---|---|
| 0.40–0.8 | ≤0.7 | 0.15–0.40 | ≤0.15 | 0.8–1.2 | 0.04–0.14 | ≤0.25 | ≤0.15 | 0.40–0.7 | 0.40–0.7 |
Grades similar to Aluminium 6262 (free machining)
Frequently asked questions
What is the equivalent of Aluminium 6262 (free machining)?
Aluminium 6262 (free machining) equivalents: USA (ASTM / AISI / SAE) 6262; UNS A96262; Europe (EN) EN AW-6262 (AlMg1SiPb); Japan (JIS) A6262; China (GB) 6262. Equivalents are close but not always identical; check the standard on your order.
What is the chemical composition of Aluminium 6262 (free machining)?
Aluminium 6262 (free machining): Si 0.40–0.8, Fe ≤0.7, Cu 0.15–0.40, Mn ≤0.15, Mg 0.8–1.2, Cr 0.04–0.14, Zn ≤0.25, Ti ≤0.15, Bi 0.40–0.7, Pb 0.40–0.7 (weight %).
What is the density of Aluminium 6262 (free machining)?
About 2.72 g/cm³ (2,720 kg/m³), the value used for weight calculations.
Need Aluminium 6262 (free machining)?
Steel Impex India, Mumbai, supplies Aluminium 6262 (free machining) in pipes, plates, sheets, bars and fittings as available, with mill test certificates. Send the grade, standard, size and quantity.