S355 Structural Steel Plates (S355JR, J0, J2, K2).
European structural steel plates to EN 10025-2 in S355JR, S355J0, S355J2 and S355K2, for projects built to Eurocode or European drawings.
Quick details
| Standard | EN 10025-2 |
|---|---|
| Grades | S355JR, S355J0, S355J2 (+N), S355K2 (+N) |
| Indian near-equivalent | IS 2062 E350 (not identical; check the drawing) |
| Thickness | 6 mm to 100 mm |
| Condition | As rolled, +N normalised or normalised rolled |
| Documents | Mill test certificate to EN 10204 3.1; 3.2 on request |
| Business type | Stockist and supplier |
| Location | Kumbharwada, Mumbai 400004, Maharashtra |
Product information for purchasing teams
S355 is the most used high-strength structural steel in EN-specified projects, with a minimum yield of 355 MPa in thin sections. The suffix sets the impact test: JR at 20 °C, J0 at 0 °C, J2 at -20 °C, and K2 at -20 °C with a higher energy requirement. S355J2+N is supplied normalised or normalised rolled.
Specifications
| Standard | EN 10025-2 |
|---|---|
| Grades | S355JR, S355J0, S355J2 (+N), S355K2 (+N) |
| Indian near-equivalent | IS 2062 E350 (not identical; check the drawing) |
| Thickness | 6 mm to 100 mm |
| Condition | As rolled, +N normalised or normalised rolled |
| Documents | Mill test certificate to EN 10204 3.1; 3.2 on request |
Chemical composition, % maximum (up to 40 mm)
| Grade | C | Mn | Si | P | S | Cu | CEV |
|---|---|---|---|---|---|---|---|
| S355JR | 0.24 | 1.60 | 0.55 | 0.035 | 0.035 | 0.55 | 0.45 |
| S355J0 | 0.20 | 1.60 | 0.55 | 0.030 | 0.030 | 0.55 | 0.45 |
| S355J2 | 0.20 | 1.60 | 0.55 | 0.025 | 0.025 | 0.55 | 0.45 |
| S355K2 | 0.20 | 1.60 | 0.55 | 0.025 | 0.025 | 0.55 | 0.45 |
Mechanical properties
| Grade | Yield ≤ 16 mm, MPa min | Yield 16–40 mm, MPa min | Tensile, MPa | Elongation, % min | Impact |
|---|---|---|---|---|---|
| S355JR | 355 | 345 | 470 – 630 | 22 | 27 J at 20 °C |
| S355J0 | 355 | 345 | 470 – 630 | 22 | 27 J at 0 °C |
| S355J2 | 355 | 345 | 470 – 630 | 22 | 27 J at -20 °C |
| S355K2 | 355 | 345 | 470 – 630 | 22 | 40 J at -20 °C |
Values per EN 10025-2. CEV limit shown is for thickness up to 30 mm.. Confirm against the current edition of the standard and your purchase specification.
Applications
- Steel structures to Eurocode
- Cranes and lifting equipment
- Offshore and port structures
- Wind tower and heavy fabrication
What to include in your RFQ
Share the grade and standard, thickness or diameter, width and length or cut sizes, quantity, delivery location and the test certificate you need.
Questions buyers ask
Which standard covers S355J2 plates?
EN 10025-2.
What sizes of S355J2 plates are available?
Standard: EN 10025-2. Grades: S355JR, S355J0, S355J2 (+N), S355K2 (+N). Indian near-equivalent: IS 2062 E350 (not identical; check the drawing). Availability is confirmed for each enquiry.
What should I send for a quotation?
Share the grade and standard, thickness or diameter, sizes or cut drawing, quantity, delivery location and the test certificate you need.
Where is Steel Impex India located?
Steel Impex India is at 231/235, Sant Sena Maharaja Marg, 2nd Kumbharwada, Mumbai 400004, and supplies across India.