ASTM A743 CA6NM (cast) equivalents, chemistry & properties.
ASTM A743 CA6NM (cast) is a steel casting used for mostly used for hydro-turbine runners, pump impellers and high-pressure valves. Below are its equivalent designations in nine standards, chemical composition, mechanical properties and density.
ASTM A743 CA6NM (cast) equivalent grades
- USA (ASTM / AISI / SAE)
- ASTM A743 CA6NM
- UNS
- J91540 (A743)
- Europe (EN)
- GX4CrNi13-4 (nearest)
- Werkstoff No. (W.Nr)
- 1.4317 (nearest)
- Japan (JIS)
- SCS6 (nearest)
Key data
- Family
- Steel casting
- Density
- 7.85 g/cm³
- Typical mechanical
- TS ≥755 MPa · YS ≥550 MPa
- Typical uses
- Mostly used for hydro-turbine runners, pump impellers and high-pressure valves
- Weight
- Calculate weight in ASTM A743 CA6NM (cast)
ASTM A743 CA6NM (cast) chemical composition (weight %)
| C | Si | Mn | P | S | Cr | Ni | Mo |
|---|---|---|---|---|---|---|---|
| ≤0.06 | ≤1.00 | ≤1.00 | ≤0.04 | ≤0.03 | 11.5–14.0 | 3.5–4.5 | 0.4–1.0 |
Grades similar to ASTM A743 CA6NM (cast)
Frequently asked questions
What is the equivalent of ASTM A743 CA6NM (cast)?
ASTM A743 CA6NM (cast) equivalents: USA (ASTM / AISI / SAE) ASTM A743 CA6NM; UNS J91540 (A743); Europe (EN) GX4CrNi13-4 (nearest); Werkstoff No. (W.Nr) 1.4317 (nearest); Japan (JIS) SCS6 (nearest). Equivalents are close but not always identical; check the standard on your order.
What is the chemical composition of ASTM A743 CA6NM (cast)?
ASTM A743 CA6NM (cast): C ≤0.06, Si ≤1.00, Mn ≤1.00, P ≤0.04, S ≤0.03, Cr 11.5–14.0, Ni 3.5–4.5, Mo 0.4–1.0 (weight %).
What is the density of ASTM A743 CA6NM (cast)?
About 7.85 g/cm³ (7,850 kg/m³), the value used for weight calculations.
Need ASTM A743 CA6NM (cast)?
Steel Impex India, Mumbai, supplies ASTM A743 CA6NM (cast) in pipes, plates, sheets, bars and fittings as available, with mill test certificates. Send the grade, standard, size and quantity.