IS 2062 E250 equivalents, chemistry & properties.
IS 2062 E250 is a structural steel used for buildings, sheds, towers, general fabrication. Below are its equivalent designations in nine standards, chemical composition, mechanical properties and density.
IS 2062 E250 equivalent grades
- India (IS)
- IS 2062 E250 (A, BR, B0, C)
- USA (ASTM / AISI / SAE)
- ASTM A36 (nearest)
- Europe (EN)
- S275JR / S235JR (nearest)
- Werkstoff No. (W.Nr)
- 1.0044 / 1.0038
- UK (BS)
- BS 4360 43A (old, nearest)
- Japan (JIS)
- SS400 (nearest)
- China (GB)
- Q235B (nearest)
- Russia (GOST)
- St3sp (nearest)
Key data
- Family
- Structural steel
- Density
- 7.85 g/cm³
- Typical mechanical
- TS ≥410 MPa · YS ≥250 MPa (≤16 mm; reduces by thickness) · El ≥23% longitudinal
- Typical uses
- Buildings, sheds, towers, general fabrication
- Weight
- Calculate weight in IS 2062 E250
IS 2062 E250 chemical composition (weight %)
IS 2062 (Part 1):2025 E250 Quality A
| C | Mn | S | P | Si | CE |
|---|---|---|---|---|---|
| ≤0.23 | ≤1.50 | ≤0.045 | ≤0.045 | ≤0.40 | ≤0.42 |
IS 2062 (Part 1):2025 E250 Quality BR / B0
| C | Mn | S | P | Si | CE |
|---|---|---|---|---|---|
| ≤0.22 | ≤1.50 | ≤0.045 | ≤0.045 | ≤0.40 | ≤0.41 |
IS 2062 (Part 1):2025 E250 Quality C
| C | Mn | S | P | Si | CE |
|---|---|---|---|---|---|
| ≤0.20 | ≤1.50 | ≤0.040 | ≤0.040 | ≤0.40 | ≤0.39 |
Grades similar to IS 2062 E250
Frequently asked questions
What is the equivalent of IS 2062 E250?
IS 2062 E250 equivalents: India (IS) IS 2062 E250 (A, BR, B0, C); USA (ASTM / AISI / SAE) ASTM A36 (nearest); Europe (EN) S275JR / S235JR (nearest); Werkstoff No. (W.Nr) 1.0044 / 1.0038; UK (BS) BS 4360 43A (old, nearest); Japan (JIS) SS400 (nearest); China (GB) Q235B (nearest); Russia (GOST) St3sp (nearest). Equivalents are close but not always identical; check the standard on your order.
What is the chemical composition of IS 2062 E250?
IS 2062 E250 (IS 2062 (Part 1):2025 E250 Quality A): C ≤0.23, Mn ≤1.50, S ≤0.045, P ≤0.045, Si ≤0.40, CE ≤0.42 (weight %).
What is the density of IS 2062 E250?
About 7.85 g/cm³ (7,850 kg/m³), the value used for weight calculations.
Need IS 2062 E250?
Steel Impex India, Mumbai, supplies IS 2062 E250 in pipes, plates, sheets, bars and fittings as available, with mill test certificates. Send the grade, standard, size and quantity.