JIS ADC12 die-casting alloy equivalents, chemistry & properties.
JIS ADC12 die-casting alloy is a aluminium (casting) used for mostly used for automotive and two-wheeler die castings, electronics housings and motor end covers. Below are its equivalent designations in nine standards, chemical composition, mechanical properties and density.
JIS ADC12 die-casting alloy equivalent grades
- USA (ASTM / AISI / SAE)
- A383 (nearest; separate AA limits)
- UNS
- A03830 (nearest)
- Europe (EN)
- EN AC-46100 (nearest)
- UK (BS)
- LM2 (nearest)
- Japan (JIS)
- ADC12
- China (GB)
- YL113 (nearest)
Key data
- Family
- Aluminium (casting)
- Density
- 2.74 g/cm³
- Typical mechanical
- As cast: TS about 310 MPa
- Typical uses
- Mostly used for automotive and two-wheeler die castings, electronics housings and motor end covers
- Weight
- Calculate weight in JIS ADC12 die-casting alloy
JIS ADC12 die-casting alloy chemical composition (weight %)
JIS H 5302:2006 ADC12
| Si | Fe | Cu | Mn | Mg | Ni | Zn | Sn |
|---|---|---|---|---|---|---|---|
| 9.6–12.0 | ≤1.3 | 1.5–3.5 | ≤0.5 | ≤0.3 | ≤0.5 | ≤1.0 | ≤0.2 |
AA A383.0 (Aluminum Association Pink Sheets, separate composition)
| Si | Fe | Cu | Mn | Mg | Ni | Zn | Sn |
|---|---|---|---|---|---|---|---|
| 9.5–11.5 | ≤1.3 | 2.0–3.0 | ≤0.50 | 0.10–0.30 | ≤0.30 | ≤3.0 | ≤0.15 |
Grades similar to JIS ADC12 die-casting alloy
Frequently asked questions
What is the equivalent of JIS ADC12 die-casting alloy?
JIS ADC12 die-casting alloy equivalents: USA (ASTM / AISI / SAE) A383 (nearest; separate AA limits); UNS A03830 (nearest); Europe (EN) EN AC-46100 (nearest); UK (BS) LM2 (nearest); Japan (JIS) ADC12; China (GB) YL113 (nearest). Equivalents are close but not always identical; check the standard on your order.
What is the chemical composition of JIS ADC12 die-casting alloy?
JIS ADC12 die-casting alloy (JIS H 5302:2006 ADC12): Si 9.6–12.0, Fe ≤1.3, Cu 1.5–3.5, Mn ≤0.5, Mg ≤0.3, Ni ≤0.5, Zn ≤1.0, Sn ≤0.2 (weight %).
What is the density of JIS ADC12 die-casting alloy?
About 2.74 g/cm³ (2,740 kg/m³), the value used for weight calculations.
Need JIS ADC12 die-casting alloy?
Steel Impex India, Mumbai, supplies JIS ADC12 die-casting alloy in pipes, plates, sheets, bars and fittings as available, with mill test certificates. Send the grade, standard, size and quantity.