Titanium Grade 5 (Ti-6Al-4V) equivalents, chemistry & properties.
Titanium Grade 5 (Ti-6Al-4V) is a titanium used for aerospace, medical implants, high-strength fasteners. Below are its equivalent designations in nine standards, chemical composition, mechanical properties and density.
Titanium Grade 5 (Ti-6Al-4V) equivalent grades
- USA (ASTM / AISI / SAE)
- ASTM B348 Gr. 5
- UNS
- R56400
- Europe (EN)
- TiAl6V4
- Werkstoff No. (W.Nr)
- 3.7165
- China (GB)
- TC4
- Russia (GOST)
- VT6
Key data
- Family
- Titanium
- Density
- 4.43 g/cm³
- Typical mechanical
- ASTM B348 annealed bar ≤76 mm: TS ≥895 MPa · YS ≥828 MPa · elongation ≥10% (4D)
- Typical uses
- Aerospace, medical implants, high-strength fasteners
- Weight
- Calculate weight in Titanium Grade 5 (Ti-6Al-4V)
Titanium Grade 5 (Ti-6Al-4V) chemical composition (weight %)
| Al | V | Fe | O | C | N | H |
|---|---|---|---|---|---|---|
| 5.5–6.75 | 3.5–4.5 | ≤0.40 | ≤0.20 | ≤0.08 | ≤0.05 | ≤0.015 |
Grades similar to Titanium Grade 5 (Ti-6Al-4V)
Frequently asked questions
What is the equivalent of Titanium Grade 5 (Ti-6Al-4V)?
Titanium Grade 5 (Ti-6Al-4V) equivalents: USA (ASTM / AISI / SAE) ASTM B348 Gr. 5; UNS R56400; Europe (EN) TiAl6V4; Werkstoff No. (W.Nr) 3.7165; China (GB) TC4; Russia (GOST) VT6. Equivalents are close but not always identical; check the standard on your order.
What is the chemical composition of Titanium Grade 5 (Ti-6Al-4V)?
Titanium Grade 5 (Ti-6Al-4V): Al 5.5–6.75, V 3.5–4.5, Fe ≤0.40, O ≤0.20, C ≤0.08, N ≤0.05, H ≤0.015 (weight %).
What is the density of Titanium Grade 5 (Ti-6Al-4V)?
About 4.43 g/cm³ (4,430 kg/m³), the value used for weight calculations.
Need Titanium Grade 5 (Ti-6Al-4V)?
Steel Impex India, Mumbai, supplies Titanium Grade 5 (Ti-6Al-4V) in pipes, plates, sheets, bars and fittings as available, with mill test certificates. Send the grade, standard, size and quantity.