EN14 (150M19) equivalents, chemistry & properties.
EN14 (150M19) is a carbon-manganese engineering steel used for mostly used for welded shafts, bolts, brackets, hydraulic parts and general engineering where weldability matters. Below are its equivalent designations in nine standards, chemical composition, mechanical properties and density.
EN14 (150M19) equivalent grades
- UK (BS)
- 150M19 (EN14A / EN14B)
- USA (ASTM / AISI / SAE)
- AISI 1522 / 1524 (nearest)
- Europe (EN)
- 20Mn5 / C22E (nearest)
Key data
- Family
- Carbon-manganese engineering steel
- Density
- 7.85 g/cm³
- Typical mechanical
- Normalised about 460–620 MPa; weldable
- Typical uses
- Mostly used for welded shafts, bolts, brackets, hydraulic parts and general engineering where weldability matters
- Weight
- Calculate weight in EN14 (150M19)
EN14 (150M19) chemical composition (weight %)
BS 970 150M19 (EN14)
| C | Si | Mn | P | S |
|---|---|---|---|---|
| 0.15–0.23 | 0.1–0.35 | 1.3–1.7 | ≤0.035 | ≤0.035 |
Grades similar to EN14 (150M19)
Frequently asked questions
What is the equivalent of EN14 (150M19)?
EN14 (150M19) equivalents: UK (BS) 150M19 (EN14A / EN14B); USA (ASTM / AISI / SAE) AISI 1522 / 1524 (nearest); Europe (EN) 20Mn5 / C22E (nearest). Equivalents are close but not always identical; check the standard on your order.
What is the chemical composition of EN14 (150M19)?
EN14 (150M19) (BS 970 150M19 (EN14)): C 0.15–0.23, Si 0.1–0.35, Mn 1.3–1.7, P ≤0.035, S ≤0.035 (weight %).
What is the density of EN14 (150M19)?
About 7.85 g/cm³ (7,850 kg/m³), the value used for weight calculations.
Need EN14 (150M19)?
Steel Impex India, Mumbai, supplies EN14 (150M19) in pipes, plates, sheets, bars and fittings as available, with mill test certificates. Send the grade, standard, size and quantity.