ISMC Channels & Mild Steel Channels.
Source specified ISMC channels through our Mumbai team. Share a size-wise bulk requirement for fabrication, supports, machinery or project work, including delivery to your town or an agreed depot.
Specifications
| Product form | Hot-rolled structural channel enquiry; exact series and profile to be specified. |
|---|---|
| Dimensions | Complete section designation, depth, flange width and required nominal kg/m. |
| Material | Specify IS 2062 grade and quality or the project-required material standard. |
| Lengths | List required length and pieces per size; availability and cutting confirmed per enquiry. |
| Documents | MTC, heat identification, inspection and approved drawing revision as specified. |
BIS published IS 808:2021 (fourth revision). Confirm the applicable edition, offered mill profile and material certificate. Nominal weight is not a load-capacity calculation. Listing does not confirm stock or dealership.
Reference sources: BIS revision notice for IS 808:2021 · Producer reference: Jindal structural sections ·
Applications
- Fabrication and structural procurement against an approved design
- Industrial supports, frames and machinery requirements subject to specification
- Mixed-size purchases by project buyers and local traders
What to include in your RFQ
Share the grade and standard, thickness or diameter, width and length or cut sizes, quantity, delivery location and the test certificate you need.
Questions buyers ask
Which standard covers ISMC channels?
See the specification table.
What sizes of ISMC channels are available?
Product form: Hot-rolled structural channel enquiry; exact series and profile to be specified.. Dimensions: Complete section designation, depth, flange width and required nominal kg/m.. Material: Specify IS 2062 grade and quality or the project-required material standard.. Availability is confirmed for each enquiry.
What should I send for a quotation?
Share the grade and standard, thickness or diameter, sizes or cut drawing, quantity, delivery location and the test certificate you need.
Where is Steel Impex India located?
Steel Impex India is at 231/235 Chouhan House, 2nd Kumbharwada Lane, Sant Sena Maharaj Marg, Mumbai, Maharashtra 400004, India We supply across India.
Can I replace a hot-rolled ISMC channel with a fabricated or cold-formed channel?
Only after approval against the actual design and purchase specification. Similar outside dimensions alone do not establish equivalent properties or acceptance.
Can long channels be delivered to a narrow-access site?
Provide the access limits, permitted vehicle length and unloading equipment. Ask the team to quote a feasible depot or last-mile arrangement. Confirm any cutting with the project designer before changing required lengths.
Are all ISMC channels of the same depth the same weight?
No. Published mill tables can include different or heavier profiles at the same nominal depth. Match flange width, web/flange details, kg/m and source to the specified section before ordering.
Can you quote for delivery to a small town or a transport depot?
Send the delivery town, district, state and six-digit PIN code. Mention site access, unloading limits and an acceptable transport depot if relevant. Freight, route availability, transit and delivery responsibility are confirmed in the quotation.
What is the minimum quantity for a bulk enquiry?
There is no universal minimum stated for all grades and sizes. Give the quantity you actually need; the team checks lot size, cutting or processing requirements and transport options before confirming MOQ and availability.