SPECIALIZED PRODUCT

Stainless Steel Rings — SS 304, 316 & 202.

Source stainless steel rings and annular blanks to your drawing. Our Mumbai team reviews bulk SS 304, 316 and 202 requirements for machining, fabrication and local trading across India.

REQUEST A QUOTE ↗ALL PRODUCTS

BULK BUYING · INDIA

Order SS rings by OD, ID, thickness and manufacturing route

Specify whether you need a plate-cut annular blank, a rolled ring or a forged ring. These routes are not interchangeable. Give blank dimensions and finished dimensions separately so machining allowance and processing feasibility can be reviewed.

Drawing and route	Drawing number and revision; plate-cut, rolled or forged requirement; approved alternatives, if any.
Ring dimensions	Outside diameter × inside diameter × axial thickness in mm, with tolerances and machining allowance.
Grade and acceptance	Exact grade, product specification, MTC, heat traceability and any inspection requirements.
Quantity and edges	Pieces per size, repeat-order quantity separately, edge condition and surface finish.

SS 304 and SS 316 ring blanks: compare OD, ID and price per piece

Example requirement: SS 304 plate-cut rings, 200 mm OD × 100 mm ID × 10 mm axial thickness, 10 pieces. Specify the blank tolerance, machining allowance and drawing revision. This example does not confirm stock or cutting feasibility.

Estimate the weight of ten SS 304 ring blanks. Use nominal weight for planning; confirm the commercial weight basis with the quotation.

Bulk deliveries to city sites and smaller-town buyers

For an urban factory or industrial estate, include receiving hours, vehicle-entry restrictions and unloading equipment. For a smaller town, send the town, district, state and six-digit PIN code, plus the nearest acceptable transport depot if collection is possible. Specify who arranges onward transport.

Traders combining several requirements should send a size-wise quantity list and request item identification and separate packing where needed. Ask for item-wise availability, dispatch timing, GST, freight and packing in the offer. Delivery routes and combined dispatch are confirmed for the actual order.

PREPARE THIS BULK ENQUIRY ↗Estimate annular ring blank weight ↗

Price per kg and delivered-cost comparison

For an SS ring price per kg or per piece, compare the same route, blank size and finished tolerance. Ask whether cutting, machining allowance, centre cut-outs, scrap, packing and freight are included. Ring weight estimates do not include cutting yield or establish finished-part acceptance.

Supply enquiries from smaller towns

Speak directly with Steel Impex India in Mumbai. Send your town, district, state and six-digit delivery PIN code. Tell us whether you need delivery at your premises or can collect from a transport depot, and describe vehicle-access or unloading limits.

The team confirms material availability, minimum quantity, freight, packing, lead time and the delivery arrangement against your actual requirement. A catalogue page does not confirm stock or service to every PIN code.

Check the delivery and landed-cost checklist · Company and certificate details

Related products for the same purchase

01 / OVERVIEW

Product information for purchasing teams

A plate-cut ring, rolled ring and forged ring are different product requirements. Specify which route the drawing requires. For a plain annular blank, provide outside diameter, inside diameter and axial thickness, along with machining allowances and tolerance. Availability and route are confirmed against the enquiry.

02 / SPECIFICATIONS

Specifications

Grades	SS 304, 316, 202; other grades against specification
Required dimensions	Outside diameter × inside diameter × axial thickness
Manufacturing route	Plate-cut, rolled or forged requirement to be stated; feasibility on review
Inspection	Specify traceability, testing and final dimensional requirements
Drawing	Send revision, tolerance, machining allowance and edge requirements
Documents	Specify MTC, heat traceability and inspection requirements before quotation.

Product and processing requirements are confirmed against the purchase specification and approved drawing. A listing does not confirm current stock, fixed dimensions or a delivery date.

03 / APPLICATIONS

Applications

Ring blanks for machining and fabrication
Spacer and annular component enquiries
Drawing-based components subject to engineering specification

04 / ENQUIRY CHECKLIST

What to include in your RFQ

Share the grade and standard, thickness or diameter, width and length or cut sizes, quantity, delivery location and the test certificate you need.

05 / QUESTIONS

Questions buyers ask

Which standard covers SS rings?

See the specification table.

What sizes of SS rings are available?

Grades: SS 304, 316, 202; other grades against specification. Required dimensions: Outside diameter × inside diameter × axial thickness. Manufacturing route: Plate-cut, rolled or forged requirement to be stated; feasibility on review. Availability is confirmed for each enquiry.

What should I send for a quotation?

Share the grade and standard, thickness or diameter, sizes or cut drawing, quantity, delivery location and the test certificate you need.

Where is Steel Impex India located?

Steel Impex India is at 231/235 Chouhan House, 2nd Kumbharwada Lane, Sant Sena Maharaj Marg, Mumbai, Maharashtra 400004, India We supply across India.

Can I send mixed ring sizes in one bulk enquiry?

Yes. List OD, ID, thickness, quantity and drawing revision on a separate line for each ring. Keep the required grade and manufacturing route clear for every item.

How do I compare an SS ring price per kg with a price per piece?

Use the same grade, manufacturing route, OD, ID, axial thickness and allowance. Ask which weight is chargeable and whether the centre cut-out, machining, cutting and packing are included. Multiply the agreed piece weight by the kg rate only when both offers use that basis.

Can a local trader order rings for several machining jobs together?

Send a separate line for each drawing revision, grade, OD, ID, thickness and quantity. Identify blank sizes and finished sizes separately. Request item-wise packing and identification, and confirm whether the order can be dispatched together.

Are stainless steel rings the same as pipe flanges?

A plain ring blank is not a certified pressure-piping flange. A flange order needs the applicable standard, rating, facing, drilling and material requirements; specify that separately.

Can you quote for delivery to a small town or a transport depot?

Send the delivery town, district, state and six-digit PIN code. Mention site access, unloading limits and an acceptable transport depot if relevant. Freight, route availability, transit and delivery responsibility are confirmed in the quotation.

What is the minimum quantity for a bulk enquiry?

There is no universal minimum stated for all grades and sizes. Give the quantity you actually need; the team checks lot size, cutting or processing requirements and transport options before confirming MOQ and availability.