INDUSTRIAL METALS · MATERIAL SOURCING · FABRICATION
sanjay@steelimp.com|+91 95946 66986
STEEL IMPEX INDIA
231/235 Chouhan House, 2nd Kumbharwada Lane, Sant Sena Maharaj Marg, Mumbai, Maharashtra 400004, India
+91 95946 66986 · sanjay@steelimp.com · steelimp.com
GSTIN 27ADJPJ5621J1ZF · Reference copy · 11 November 2026

STEEL IMPEX INDIA · ENGINEERING REFERENCE

Valve Types & Dimensions: Gate, Globe, Ball & Check

Identify the valve mechanism, body and trim material, end connection and pressure class before checking dimensions. Browse gate, globe, ball, butterfly, check, needle, diaphragm and other valve types, with source-specific dimensional charts.

Compiled by Steel Impex India · Source review · Values match app v1.5.11

Open reference Common questions

41 valves varieties

Wedge gate valveGate · API 600 / API 603Wedge gate valve identification drawing, not to scale

Solid / flexible wedge

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Slab gate valveGate · API 6DSlab gate valve identification drawing, not to scale

Through-conduit / subsea

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Expanding gate valveGate · API 6DExpanding gate valve identification drawing, not to scale

Expanding closure

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Parallel-slide gate valveGate · Parallel-slide gate valve identification drawing, not to scale

Parallel sealing faces

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Globe valveGlobe · ASME B16.34Globe valve identification drawing, not to scale

Straight / Y-pattern

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Angle globe valveGlobe · Angle globe valve identification drawing, not to scale

Right-angle flow path

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Floating ball valveBall · Floating ball valve identification drawing, not to scale

Two-piece / three-piece

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Trunnion ball valveBall · API 6DTrunnion ball valve identification drawing, not to scale

Side-entry / top-entry / welded body

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Segmented V-ball control valveControl · Segmented V-ball control valve identification drawing, not to scale

Characterised segment

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Concentric butterfly valveButterfly · API 609Concentric butterfly valve identification drawing, not to scale

Wafer / lug / double flange

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Double-offset butterfly valveButterfly · API 609Double-offset butterfly valve identification drawing, not to scale

High-performance design

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Triple-offset butterfly valveButterfly · API 609Triple-offset butterfly valve identification drawing, not to scale

Metal sealing

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Swing check valveCheck · ASME B16.34Swing check valve identification drawing, not to scale

Hinged disc

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Dual-plate check valveCheck · API 594Dual-plate check valve identification drawing, not to scale

Two spring-loaded plates

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Lift check valveCheck · Lift check valve identification drawing, not to scale

Guided lifting disc

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Nozzle check valveCheck · Nozzle check valve identification drawing, not to scale

Axial guided closure

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Tilting-disc check valveCheck · Tilting-disc check valve identification drawing, not to scale

Tilting disc

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Plug valvePlug · Plug valve identification drawing, not to scale

Lubricated / sleeved / lined

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Diaphragm valveDiaphragm · Diaphragm valve identification drawing, not to scale

Weir / straight-through

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Lined valveLined · Lined valve identification drawing, not to scale

PFA-lined designs

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Cryogenic valveSpecial service · Cryogenic valve identification drawing, not to scale

Extended bonnet / qualified design

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Pressure-seal valveSpecial service · Pressure-seal valve identification drawing, not to scale

Gate / globe / check

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Bellows-sealed valveSpecial service · Bellows-sealed valve identification drawing, not to scale

Gate / globe

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Three-way control valveControl · Three-way control valve identification drawing, not to scale

Mixing / diverting

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Severe-service control valveControl · Severe-service control valve identification drawing, not to scale

Multistage / anti-cavitation / low-noise trim

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Steam-conditioning valveControl · Steam-conditioning valve identification drawing, not to scale

Pressure and temperature conditioning

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Float valveWaterworks · Float valve identification drawing, not to scale

Level control

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Sluice valveWaterworks · Sluice valve identification drawing, not to scale

Rising / non-rising stem

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Automated isolation valveActuated · Automated isolation valve identification drawing, not to scale

Pneumatic / electric / hydraulic actuator

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Needle valveInstrumentation · Needle valve identification drawing, not to scale

Fine stem / seat

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Metering valveInstrumentation · Metering valve identification drawing, not to scale

Fine flow adjustment

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Instrument manifoldInstrumentation · Instrument manifold identification drawing, not to scale

Multiple isolation / bleed passages

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Excess-flow valveInstrumentation · Excess-flow valve identification drawing, not to scale

Flow-triggered closure

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Safety valvePressure protection · Safety valve identification drawing, not to scale

Model-specific set pressure and certified capacity

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Pressure-reducing valvePressure control · Pressure-reducing valve identification drawing, not to scale

Direct / pilot-operated

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Surplussing valvePressure control · Surplussing valve identification drawing, not to scale

Upstream / back-pressure control

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Air vent / eliminatorWaterworks · Air vent / eliminator identification drawing, not to scale

Automatic air removal

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Vacuum breakerPressure control · Vacuum breaker identification drawing, not to scale

Vacuum relief

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Pinch valvePinch · Pinch valve identification drawing, not to scale

Flexible tube compression

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Knife gate valveGate · Knife gate valve identification drawing, not to scale

Blade closure

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Solenoid valveActuated · Solenoid valve identification drawing, not to scale

Pilot-operated 3/2 model reference

Specify fluid, design pressure and temperature, end connection, body and trim, seat, actuation and testing. Class is not a pressure in psi. Dimensions depend on the exact model and standard series.

Identification sketch only. Use the exact manufacturer drawing for tolerances and manufacture.

Manufacturer-specific dimensions and PDF charts

Each table retains its own model, material, limit definitions and source page. Blank or unlisted sizes are not estimates.

L&T corrosion-resistant gate valve · 31 sizes/classes

Download complete branded PDF

Dimensions belong to this manufacturer catalogue. Confirm its current drawing and revision before ordering; other designs can differ.

Class is a rating designation, not pressure in psi. This table supplies no pressure-temperature rating.

All published dimensional rows retained. Gate NPS 22 appears in the range matrix but has no dimensional row; no dimensions are invented for it.

Original manufacturer source · page 5

L&T corrosion-resistant gate valve
Size / classA face-to-face (mm)B open height (mm)C handwheel diameter (mm)D bore (mm)Approximate mass (kg)
NPS 2 / DN 50 · Class 15017836020350.814
NPS 2 / DN 50 · Class 30021637020350.821
NPS 2 / DN 50 · Class 60029239520350.833
NPS 3 / DN 80 · Class 15020348020376.226
NPS 3 / DN 80 · Class 30028350522976.242
NPS 3 / DN 80 · Class 60035654025476.254
NPS 4 / DN 100 · Class 150229580229101.640
NPS 4 / DN 100 · Class 300305600254101.662
NPS 4 / DN 100 · Class 600432635305101.695
NPS 6 / DN 150 · Class 150267790254152.465
NPS 6 / DN 150 · Class 300403850356152.4125
NPS 6 / DN 150 · Class 600559870457152.4200
NPS 8 / DN 200 · Class 150292990356203.2104
NPS 8 / DN 200 · Class 3004191035406203.2185
NPS 8 / DN 200 · Class 6006601040457199.9340
NPS 10 / DN 250 · Class 1503301200406254150
NPS 10 / DN 250 · Class 3004571265457254285
NPS 10 / DN 250 · Class 6007871465630247.7560
NPS 12 / DN 300 · Class 1503561400457304.8225
NPS 12 / DN 300 · Class 3005021460508304.8400
NPS 12 / DN 300 · Class 6008381695630298.5780
NPS 14 / DN 350 · Class 1503811530508336.6350
NPS 14 / DN 350 · Class 3007621770500336.6620
NPS 16 / DN 400 · Class 1504061900500387.4450
NPS 16 / DN 400 · Class 3008381995630387.4800
NPS 18 / DN 450 · Class 1504322150500438.2565
NPS 18 / DN 450 · Class 3009142320710431.81100
NPS 20 / DN 500 · Class 1504572370630489720
NPS 20 / DN 500 · Class 3009912500710482.61375
NPS 24 / DN 600 · Class 1505082650630590.61160
NPS 24 / DN 600 · Class 30011432900800584.22100
L&T corrosion-resistant globe valve · 21 sizes/classes

Download complete branded PDF

Dimensions belong to this manufacturer catalogue. Confirm its current drawing and revision before ordering; other designs can differ.

Class is a rating designation, not pressure in psi. This table supplies no pressure-temperature rating.

Manufacturer body material example: ASTM A351 CF8M; other material options require confirmation.

Original manufacturer source · page 6

L&T corrosion-resistant globe valve
Size / classA face-to-face (mm)B open height (mm)C handwheel diameter (mm)D bore (mm)Approximate mass (kg)
NPS 2 / DN 50 · Class 15020338020350.818
NPS 2 / DN 50 · Class 30026741520350.825
NPS 2 / DN 50 · Class 60029247525450.835
NPS 3 / DN 80 · Class 15024146025476.232
NPS 3 / DN 80 · Class 30031851525476.245
NPS 3 / DN 80 · Class 60035658535676.260
NPS 4 / DN 100 · Class 150292535305101.650
NPS 4 / DN 100 · Class 300356605356101.675
NPS 4 / DN 100 · Class 600432665406101.6105
NPS 6 / DN 150 · Class 150406610356152.490
NPS 6 / DN 150 · Class 300444715457152.4150
NPS 6 / DN 150 · Class 6005591085710152.4205
NPS 8 / DN 200 · Class 150495775457203.2180
NPS 8 / DN 200 · Class 3005591185710203.2325
NPS 8 / DN 200 · Class 6006601400800199.9570
NPS 10 / DN 250 · Class 150622970500254300
NPS 10 / DN 250 · Class 3006221290800254550
NPS 10 / DN 250 · Class 6007871570800247.7805
NPS 12 / DN 300 · Class 1506981195710304.8390
NPS 12 / DN 300 · Class 3007111480800304.8675
NPS 12 / DN 300 · Class 6008381810800298.51040
L&T corrosion-resistant check valve · 21 sizes/classes

Download complete branded PDF

Dimensions belong to this manufacturer catalogue. Confirm its current drawing and revision before ordering; other designs can differ.

Class is a rating designation, not pressure in psi. This table supplies no pressure-temperature rating.

Manufacturer body material example: ASTM A351 CF8M; other material options require confirmation.

Original manufacturer source · page 7

L&T corrosion-resistant check valve
Size / classA face-to-face (mm)B height, ±5% (mm)C bore (mm)Approximate mass (kg)
NPS 2 / DN 50 · Class 15020315050.811
NPS 2 / DN 50 · Class 30026716050.819
NPS 2 / DN 50 · Class 60029217550.826
NPS 3 / DN 80 · Class 15024118076.225
NPS 3 / DN 80 · Class 30031819076.235
NPS 3 / DN 80 · Class 60035620076.240
NPS 4 / DN 100 · Class 150292210101.635
NPS 4 / DN 100 · Class 300356225101.653
NPS 4 / DN 100 · Class 600432245101.670
NPS 6 / DN 150 · Class 150356265152.465
NPS 6 / DN 150 · Class 300444315152.4110
NPS 6 / DN 150 · Class 600559330152.4150
NPS 8 / DN 200 · Class 150495325203.2120
NPS 8 / DN 200 · Class 300533365203.2175
NPS 8 / DN 200 · Class 600660410199.9240
NPS 10 / DN 250 · Class 150622405254235
NPS 10 / DN 250 · Class 300622410254245
NPS 10 / DN 250 · Class 600787495247.7410
NPS 12 / DN 300 · Class 150698455304.8275
NPS 12 / DN 300 · Class 300711485304.8360
NPS 12 / DN 300 · Class 600838570298.5630

Material and grade designations

A material alloy, bolt grade, nut grade and mechanical property class describe different requirements. These references supplement the 318-grade finder; they are not automatic equivalents.

ASTM A216 WCAValve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A216 WCBValve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A216 WCCValve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A352 LCAValve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A352 LCBValve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A352 LCCValve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A352 LC3Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A217 WC1Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A217 WC6Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A217 WC9Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A217 C5Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A217 C12Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A217 C12AValve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A351 CF8Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A351 CF8MValve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A351 CF3Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A351 CF3MValve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A351 CF8CValve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F304Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F304LValve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F316Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F316LValve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F321Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F347Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F11Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F22Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F5Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F9Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F91Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F51Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A182 F53Valve body / trim material

Cast and forged product specifications remain distinct. Pressure-temperature rating requires the applicable material group, valve design and standard edition.

ASTM A351 CK3MCuNValve material

Listed corrosion-resistant valve option; confirm the exact valve model and material group.

ASTM A995 CD3MNValve material

Listed corrosion-resistant valve option; confirm the exact valve model and material group.

ASTM A351 CN7MValve material

Listed corrosion-resistant valve option; confirm the exact valve model and material group.

ASTM A494 CW12MWValve material

Listed corrosion-resistant valve option; confirm the exact valve model and material group.

ASTM A351 CN3MNValve material

Listed corrosion-resistant valve option; confirm the exact valve model and material group.

Indian and international catalogue sources

Source references do not imply that Steel Impex India stocks, represents or is endorsed by these brands. Delhi NCR and Punjab locations identify the cited source; they are not branch-office claims.

L&T Valves

India / international · Manufacturer

Valve families and automation.

Visit source catalogue

Source checked 2026-11-11

Velan

International · Manufacturer

Gate, globe, check, ball, triple-offset and pressure-seal valve families.

Visit source catalogue

Source checked 2026-11-11

PetrolValves

International · Manufacturer

Trunnion/floating ball; slab, expanding and parallel-slide gate; check designs.

Visit source catalogue

Source checked 2026-11-11

Emerson / Fisher

International · Manufacturer

Globe, angle, segmented-ball, three-way and severe-service control valves.

Visit source catalogue

Source checked 2026-11-11

KSB India / MIL

India / international · Manufacturer

Named valve series, including control, isolation and steam-conditioning products.

Visit source catalogue

Source checked 2026-11-11

L&T corrosion-resistant valves

India / international · Manufacturer

API 603 gate and B16.34 globe/check range; individual size/class matrices and drawings govern.

Visit source catalogue

Source checked 2026-11-11

BDK Valves

India · Manufacturer

Gate, globe, check, ball, butterfly, plug, diaphragm and lined valves.

Visit source catalogue

Source checked 2026-11-11

Flowserve

International · Manufacturer

Isolation, control and actuation product data.

Visit source catalogue

Source checked 2026-11-11

Leader Valves

India · Punjab · Manufacturer

Water, steam and industrial valve catalogue.

Visit source catalogue

Source checked 2026-11-11

Kirloskar Brothers

India · Manufacturer

Waterworks catalogue. Model-specific dimensions are not yet transcribed.

Visit source catalogue

Source checked 2026-11-11

Swagelok

International · Manufacturer catalogue / regional sales office

Instrument valves, manifolds, metering and excess-flow valves.

Visit source catalogue

Source checked 2026-11-11

Spirax Sarco

International · Manufacturer

Safety-valve series; certified sizing and setting are product-specific.

Visit source catalogue

Source checked 2026-11-11

Spirax Sarco pressure controls

International · Manufacturer

Pressure reducing and back-pressure control families.

Visit source catalogue

Source checked 2026-11-11

Spirax Sarco pipeline ancillaries

International · Manufacturer

Air vents, air eliminators and vacuum breakers.

Visit source catalogue

Source checked 2026-11-11

GEMÜ

International · Manufacturer

Pinch valve mechanisms and actuator variants.

Visit source catalogue

Source checked 2026-11-11

AVK

International · Manufacturer

Industrial valve programme including knife gates.

Visit source catalogue

Source checked 2026-11-11

ASCO / Emerson

International · Manufacturer

Pilot-operated solenoid valve instructions; model-specific electrical and pressure limits.

Visit source catalogue

Source checked 2026-11-11

Coverage and unresolved source issues

Original drawings are identification schematics, not fabrication drawings or standard P&ID symbols.

DIN references are catalogue designations, not claims of current validity or exact ISO equivalence. Order the required edition.

APL lists DIN 7981 as a low-head Allen screw, which conflicts with the pan-head tapping-screw designation. It is held for clarification, not silently imported.

Manufacturer ranking and supply affiliation are not claimed.

Model-specific valve tables and complete fastener tolerance tables are still under review. Use linked manufacturer drawings; missing dimensions are never filled by voting or extrapolation.

Published differences between standards, editions or models remain separate even if multiple websites repeat one value.

Prepare a bulk enquiry for delivery within India

Include the material grade, standard and edition, complete size, quantity, finish, certificates, required date and delivery PIN code. For valves include body/trim, seats, service fluid, temperature, end connection and actuator. For fasteners include thread, pitch, length, property class and coating.

For a village, small town or large city, give the district, nearest transport depot and unloading arrangements. Stock, suitability, freight and delivery are confirmed for each order.

Prepare your material enquiry Delivery checklist

Common questions

Does Class 150 mean a valve is rated for 150 psi?

No. A class is a rating designation. Allowable pressure depends on the material group, temperature, design and applicable standard. Use the manufacturer’s pressure-temperature rating for the exact valve.

Can I use one valve dimension chart for every manufacturer?

No. These L&T API 603 tables identify their source model and page. Other designs, end connections and revisions can have different face-to-face lengths, heights, bores and masses. Missing sizes are not estimated.

What should a bulk buyer send for a quotation?

Send the exact standard and edition, grade or class, complete dimensions, quantity, finish, certification and delivery town, district and PIN code. Include the nearest transport depot for village or small-town delivery. Availability, price, freight and delivery are confirmed against your enquiry.

Reference sources and corrections · Toolkit terms. Source scope, units and missing values remain part of every reference. A catalogue listing is not a stock guarantee, approval for substitution or brand affiliation.