SPECIALIZED PRODUCT

Stainless Steel Circles & Discs — SS 304, 316 & 202.

Name: Steel Impex India
Address: 231/235 Chouhan House, 2nd Kumbharwada Lane, Sant Sena Maharaj Marg, Mumbai, Maharashtra, 400004, IN
Telephone: +919594666986
Price range: On enquiry

Enquire about SS 304, 316 and 202 circles and discs for your specified fabrication or machining job. Send a diameter-wise quantity list and delivery PIN code to our Mumbai team.

REQUEST A QUOTE ↗ALL PRODUCTS

BULK BUYING · INDIA

Bulk stainless steel circles for cutting, forming or machining

A solid circle is ordered by outside diameter and thickness; a ring also has an inside diameter. Tell us whether the circle will be machined, formed or used as a flat blank, because edge condition, flatness and material condition can matter to the next operation.

Dimensions	Outside diameter × thickness in mm, permitted tolerances and blank or finished-size basis.
Grade and condition	Exact stainless grade, product standard and material condition required by the process.
Surface and edges	Finish, protective film, burr or edge requirements and scratch-sensitive faces.
Production schedule	Pieces per diameter, drawing revision, required date and any separate repeat requirement.

SS circle diameter, thickness and price per blank

Example requirement: SS 316 circles, 200 mm diameter × 3 mm thickness, 100 pieces. State whether these are flat cut blanks or intended for forming; specify finish, edge condition and blank tolerance. A calculated disc weight does not include nesting loss.

Estimate 100 SS 316 circle blanks. Use nominal weight for planning; confirm the commercial weight basis with the quotation.

Bulk deliveries to city sites and smaller-town buyers

For an urban factory or industrial estate, include receiving hours, vehicle-entry restrictions and unloading equipment. For a smaller town, send the town, district, state and six-digit PIN code, plus the nearest acceptable transport depot if collection is possible. Specify who arranges onward transport.

Traders combining several requirements should send a size-wise quantity list and request item identification and separate packing where needed. Ask for item-wise availability, dispatch timing, GST, freight and packing in the offer. Delivery routes and combined dispatch are confirmed for the actual order.

PREPARE THIS BULK ENQUIRY ↗Calculate solid circle and disc weight ↗

Price per kg and delivered-cost comparison

An SS circle price per piece depends on grade, thickness, diameter, finish, quantity and cutting scope. Compare the usable blank size and weight basis, including nesting yield, packing and freight. A solid-disc calculation estimates material weight, not a guaranteed invoice weight.

Supply enquiries from smaller towns

Speak directly with Steel Impex India in Mumbai. Send your town, district, state and six-digit delivery PIN code. Tell us whether you need delivery at your premises or can collect from a transport depot, and describe vehicle-access or unloading limits.

The team confirms material availability, minimum quantity, freight, packing, lead time and the delivery arrangement against your actual requirement. A catalogue page does not confirm stock or service to every PIN code.

Check the delivery and landed-cost checklist · Company and certificate details

Related products for the same purchase

01 / OVERVIEW

Product information for purchasing teams

A stainless steel circle is a solid round blank specified by outside diameter and thickness. For a cut blank, clarify the source-sheet grade, dimensional tolerance, edge condition and finish. Drawing and process requirements are reviewed before quotation.

02 / SPECIFICATIONS

Specifications

Grades	SS 304, 316, 202; other stainless grades on enquiry
Required dimensions	Outside diameter × thickness; state units and tolerance
Finish	Specify the required surface finish and whether protective film is needed
Quantity	Pieces and/or total weight; minimum quantity confirmed by source
Processing	Cutting route, edge quality and drawing revision to be agreed
Documents	Specify MTC, heat traceability and inspection requirements before quotation.

Product and processing requirements are confirmed against the purchase specification and approved drawing. A listing does not confirm current stock, fixed dimensions or a delivery date.

03 / APPLICATIONS

Applications

Fabrication blanks where the specified grade is suitable
Machined discs and circular components
Forming and pressing enquiries subject to material and process review

04 / ENQUIRY CHECKLIST

What to include in your RFQ

Share the grade and standard, thickness or diameter, width and length or cut sizes, quantity, delivery location and the test certificate you need.

05 / QUESTIONS

Questions buyers ask

Which standard covers SS circles and discs?

See the specification table.

What sizes of SS circles and discs are available?

Grades: SS 304, 316, 202; other stainless grades on enquiry. Required dimensions: Outside diameter × thickness; state units and tolerance. Finish: Specify the required surface finish and whether protective film is needed. Availability is confirmed for each enquiry.

What should I send for a quotation?

Share the grade and standard, thickness or diameter, sizes or cut drawing, quantity, delivery location and the test certificate you need.

Where is Steel Impex India located?

Steel Impex India is at 231/235 Chouhan House, 2nd Kumbharwada Lane, Sant Sena Maharaj Marg, Mumbai, Maharashtra 400004, India We supply across India.

How do I distinguish a circle from a ring on an enquiry?

A circle or disc is solid and needs OD and thickness. A ring has a central opening and needs OD, ID and axial thickness. Attach the drawing if holes or other features are required.

What should I specify for 200 mm or 300 mm SS circles?

Give the diameter and thickness in mm for each size, exact grade, number of blanks, finish and permitted tolerances. State whether the circle is for machining or forming, and attach the drawing when features or finished dimensions matter.

Does SS circle price include the unused part of the sheet?

Not necessarily. Ask whether the quote covers finished blanks, full source-sheet weight or an agreed cutting yield. Confirm kerf, nesting, chargeable scrap, edge finishing, packing and freight before comparing price per kg or per piece.

Can any stainless circle be used for deep drawing?

No. State the forming process, required material condition, surface and acceptance criteria. Suitability needs review against the actual process and offered material before purchase.

Can you quote for delivery to a small town or a transport depot?

Send the delivery town, district, state and six-digit PIN code. Mention site access, unloading limits and an acceptable transport depot if relevant. Freight, route availability, transit and delivery responsibility are confirmed in the quotation.

What is the minimum quantity for a bulk enquiry?

There is no universal minimum stated for all grades and sizes. Give the quantity you actually need; the team checks lot size, cutting or processing requirements and transport options before confirming MOQ and availability.